Ozone measurements along vertical transects in the Alps

To investigate the vertical profiles of air pollutants in the boundary layer, aircraft and balloon-born measurements and measurements using a cable car as an instrument platform have been performed in different parts of the Alps. This on-line monitoring of atmospheric pollutants requires expensive and sophisticated techniques. In order to control ambient air quality in remote regions, where no infrastructure like power supply is available, simple instruments are required. The objective of this study, which was coordinated and evaluated by the GSF-Forschungszentrum für Umwelt und Gesundheit was first, to investigate the vertical distribution of ozone in different parts of the Alps and secondly, in addition to continuous analyser measurements, to test monitoring by means of two types of passive samplers. The selection of these samplers — one for one week use and another one for two week application — was based on a passive sampler intercomparison done in a preliminary study one year earlier.     

A qualitative field method for monitoring pesticides in the edge-of-field runoff

A field method is described, which allows the qualitative estimation of pesticide contamination in the edgeof-field runoff. The method employs cheap and easy-to-use runoff sampling bottles, which were installed in an agricultural stream catchment over a period of three growing seasons. During this time 18 runoff events were detected, in nine of which insecticide contamination was measured (maximum concentrations: lindane 0.7 μg l⁻¹ and 12.7 μg kg⁻¹, parathion 20 μg l⁻¹ and 728 μg kg⁻, fenvalerate 18.4 μg 1-1 and 924 μg kg⁻¹). These insecticides were detected mainly as particle-bound chemicals. On about 80 % of the occasions the presence or absence of runoff measured in the field was in agreement with a simulation of runoff presence or absence using the runoff model KINEROS.     

Intercomparison study on commonly used methods to determine microplastics in wastewater and sludge samples

Environmental Science and Pollution Research - The harmonized procedures in terms of the sampling, sample treatment and identification of microplastics in different environmental samples are...     

Accounting for multiple testing in the analysis of spatio-temporal environmental data

The statistical analysis of environmental data from remote sensing and Earth system simulations often entails the analysis of gridded spatio-temporal data, with a hypothesis test being performed for each grid cell. When the whole image or a set of grid cells are analyzed for a global effect, the problem of multiple testing arises. When no global effect is present, we expect $$ \alpha $$% of all grid cells to be false positives, and spatially autocorrelated data can give rise to clustered spurious rejections that can be misleading in an analysis of spatial patterns. In this work, we review standard solutions for the multiple testing problem and apply them to spatio-temporal environmental data. These solutions are independent of the test statistic, and any test statistic can be used (e.g., tests for trends or change points in time series). Additionally, we introduce permutation methods and show that they have more statistical power. Real-world data are used to provide examples of the analysis, and the performance of each method is assessed in a simulation study. Unlike other simulation studies, our study compares the statistical power of the presented methods in a comprehensive simulation study. In conclusion, we present several statistically rigorous methods for analyzing spatio-temporal environmental data and controlling the false positives. These methods allow the use of any test statistic in a wide range of applications in environmental sciences and remote sensing.     

Sink–float density separation of post-consumer plastics for feedstock recycling

The paper focuses on current mechanical waste processing technologies and out-of-the-box processes linked to the processing of coal and mineral resources, to ensure high-quality feedstock recycling of polyolefin-rich post-consumer plastic fractions. Moreover, the study aims to provide the basis for the technical and economic feasibility of the chemical recycling route of this plastic fraction. When evaluating common mechanical processes, either dry or wet ones, sink–float separation in a cylindrical centrifugal force separator achieves the best results. It combines the advantages of a simple, robust apparatus of low complexity and high capacity with selective separation through the accelerated settling of particles in the centrifugal field. Furthermore, the disconnection of the separation medium feed from the solid input increases residence times. Based on the above findings, a pilot-scale plant was constructed which consists of a centrifugal force separator and a hydro jig for the pre-separation of heavy waste components. Several test campaigns were conducted to separate polyolefins from various waste fractions. Two-stage processing in the centrifugal force separator rendered almost 90 wt% of polyolefin content in the produced lightweight fraction and of polyolefin recovery. One-stage processing, on the other hand, resulted in reduced polyolefin content in the lightweight fraction.

     

Eco-Labelling of Shampoos,Shower Gels and Foam Baths (6 pp)

GOAL, SCOPE AND BACKGROUND: Environmental issues of personal care products have been met with little attention in the past. Monitoring data as well as preliminary environmental risk assessments indicate that some ingredients in personal care products might be relevant pollutants in the environment. Following the precautionary principle, eco-labelling is proposed as an effective tool for source control of one major group of personal care products, shampoos, shower gels and foam baths (SSBs). Eco-labelling is a soft, but effective market driven and product specific approach to lower discharge of environmentally detrimental substances. Products that fulfil the criteria proposed help to minimise the impact of SSBs on the environment. METHODS: Available assessment tools for dangerous substances (e.g. current legislation on environmental risk assessments and classification, and labelling, eco-labelling criteria for similar products, the calculation of the critical dilution volume) were adapted and integrated into the criteria for the eco-labelling of SSBs. RESULTS AND DISCUSSION: A short outline of the eco-labelling criteria developed for SSBs is provided. The basic criteria concern the effects of the substances discharged into the waste water during and after use. Products with an eco-label award may exclusively contain substances for which basic information about their effects on the environment is available. They may not contain persistent, bioaccumulating, toxic or ecotoxicological substances. In addition, the basic criteria include requirements for the container and consumer information. CONCLUSION: The basic criteria for eco-labelling SSBs are based on the actual state of science and are at the same time as simple and transparent as possible to ensure the best applicability. SSBs that comply with the described basic criteria can contribute to a lower chemical burden of waste water treatment plants and surface water. RECOMMENDATION AND OUTLOOK: The proposal for basic criteria described should stimulate discussion on eco-labelling of SSBs. It should help to pass valid criteria supported by authorities, producers and consumer groups for a national or international eco-label, e.g. for the European Flower or the German Blue Angel. In future, the successful introduction of labelled SSBs into the market will raise the awareness of the general public about the environmental effects of personal care products and it will help to promote environmentally compatible products.     

Extreme value analysis of Munich air pollution data

We present three different approaches to modelling extreme values of daily air pollution data. We fitted a generalized extreme value distribution to the monthly maxima of daily concentration measures. For the exceedances of a high threshold depending on the data, the parameters of the generalized Pareto distribution were estimated. Accounting for autocorrelation, clusters of exceedances were used. To obtain information about the relationship of the exceedance of the air quality standard and possible predictors we applied logistic regression. Results and their interpretation are given for daily average concentrations of ozone and nitrogen dioxide at two monitoring sites within the city of Munich.     

Impact of a flood disaster on sediment toxicity in a major river system--the Elbe flood 2002 as a case study

The ecotoxicological implications of a flooding disaster were investigated with the exceptional Elbe flood in August 2002 as an example. Sediment samples were taken shortly after the flood at 37 sites. For toxicity assessment the midge Chironomus riparius (Insecta) and the mudsnail Potamopyrgus antipodarum (Gastropoda) were exposed to the sediment samples for 28 days. For a subset of 19 sampling sites, the contamination level and the biological response of both species were also recorded before the flood in 2000. The direct comparison of biological responses at identical sites revealed significant differences for samples taken before and immediately after the flood. After flood sediments of the river Elbe caused both higher emergence rates in the midge and higher numbers of embryos in the mudsnail. Contrary to expectations the toxicity of the sediments decreased after the flood, probably because of a dilution of toxic substances along the river Elbe and a reduction in bioavailability of pollutants as a result of increasing TOC values after the flood.     

Simulated distributions of Baltic Sea-ice in warming climate and consequences for the winter habitat of the Baltic ringed seal

Sea-ice in the Baltic Sea in present and future climates is investigated. The Rossby Centre Regional Atmosphere-Ocean model was used to perform a set of 30-year-long time slice experiments. For each of the two driving global models HadAM3H and ECHAM4/OPYC3, one control run (1961-1990) and two scenario runs (2071-2100) based upon the SRES A2 and B2 emission scenarios were conducted. The future sea-ice volume in the Baltic Sea is reduced by 83% on average. The Bothnian Sea, large areas of the Gulf of Finland and Gulf of Riga, and the outer parts of the southwestern archipelago of Finland will become ice-free in the mean. The presented scenarios are used to study the impact of climate change on the Baltic ringed seal (Phoca hispida botnica). Climate change seems to be a major threat to all southern populations. The only fairly good winter sea-ice habitat is found to be confined to the Bay of Bothnia.